Moncha Lite 2
Moncha.lite 2
世界最小のイーサネットレーザーショーコントローラー
この製品はレーザー本体に内蔵もしくはボックスに入れて使います。
主にOEMで使われています。
ご興味がある方は連絡を下さい。
-
It's lite in a massive way
Moncha lite is the smallest and most affordable laser controller on the laser market. Just build it into laser and Click to Play!
-
See it in action
One of the many shows we’ve performed using Moncha.lite 2. 16 independent laser show systems controlled over directional Wi-Fi antennas. All running from standard i5-based laptop. Piece of cake
-
Art-Net
Moncha.lite 2 like Moncha.box 2 allows you to store laser animations to supplied micro-SD card. You can use Art-Net protocol to trigger these animations and also control all the basic parameters like Size, Brightness, Position and many more (more than 20 parameters in fact).
Art-Net is great if you want to create your laser show e.g. using grandMA or any other Art-Net controller.
-
Web Configuration
-
Micro SD-card
You can store laser show content on supplied micro SD card and perform laser shows without the computer. Use GrandMA, Chamsys or any other favourite DMX/Art-Net controller to perform laser shows. Moncha.box 2 can use up to 64 GB SD cards, which allows you to store few hours of laser shows in single device. You can store up to 255 different laser shows on single SD card. There is a SD card support integrated in Moncha software, which allows you direct upload of your laser show to your device. No need to remove an insert the
High Performance
Maximum scan-rate up to 100000 pps (Points Per Second). |
Running at 50+ FPS (Frames Per Second), which ensures smooth laser show output. |
Real-time frame compression improves performance over wireless Wi-Fi networks |
We’ve tested Moncha.lite 2 to create laser show for 50 lasers controlled directly form your computer – and it works just fine. |